|
|
 |
 |
| Don't want to be surprised? Can't see the end of your driveway? Try a driveway alarm to keep you informed. Driveway monitors detect only cars so you will have an accurate alarm when someone has entered your property. We have accessories so you can customize your alarm and add a counter for drive thru windows. |
Driveway Monitor Alarms Menu:
 |
Wireless Driveway Alarm |
 |
Keep track of the comings and goings on your property with this electromagnetic
sensor alert system. When a vehicle passes the sensor, the receiver
emits an audible tone and lets you know someone’s there.
- Instantly be alerted when someone pulls into or out of your driveway
- Functional range of up to 400 ft.
- Indoor chime announces visitors or unwelcome guests
- Electromagnetic sensor only senses large metal objects
avoiding false signals due to animals or children.
- Indoor receiver can be mounted on a table or wall
- Easy-to-install and stake is included in kit
- Transmitter requires 2 “C” batteries (not included)
- Long battery life
- Low battery indicator on both the Indoor reciever and transmitter
The driveway alarm contains:
Installation hardware, stake, outdoor driveway transmitter
and transformer for indoor receiver/announcer. |
|
Wireless Driveway Alarm with Metallic Object Sensor |
|
Wireless Driveway Alarm by Dakota detects metallic objects |
The Driveway Alarm System is magnetometer based wireless driveway alert system which means it detects metallic objects only. Humans, animals, or other things non-metallic objects will not set the transmitter off. The transmitter or sensor, uses a 9-volt battery that is connected with 50 feet of wire to the probe buried in the ground. The sensor's probe should be buried parallel to the detection area (like a driveway) and will then detect cars within 10-12 feet. When a vehicle drives by, the transmitter will send a signal to the WPA-3000 receiver up to 600 feet away. The Dakato Alert 3000 series is the latest technology from Dakota Alert and is not compatable with earlier products.- The plugin receiver in this set is the WR-3000 and plugs into a standard wall outlet and may be set to one of four tones. You may also additional receivers and sensors to the 3000 series driveway alarm systems.
- Driveway Alert only detects cars! This driveway alarm is reliable, easy to install, and has up to a 600 ft range to receiver. The WPA-3000 by Dakota Alert is a solid performer ideal for situations where you ONLY want to detect large metallic objects in entering your driveway or street. The wireless sensor will not detect movement by non-metallic objects.
- The WR-3000 is equipped with four form “C” relays (one for each channel), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.
- Temperature operating range of this product is -30 degrees to 120 degrees fahrenheit
|
|
Wireless Driveway Monitor Alarm System |
|
 | |
The STI-30150 is a wireless driveway monitoring system that sends a wireless signal to a receiver when a vehicle enters your driveway. The receiver will chime and a red LED will flash when it is activated. Once the receiver chimes, it will continue to flash for approximately 15 minutes or until the reset button is pressed. This system will transmit its wireless system up to 1,000 feet under ideal conditions and line of site.
*When the sensor detects a car and signals the receiver, there will be a five second delay for the unit to reset itself prior to detecting the next vehicle.
This system is a magnetometer based system which means large metallic objects, steel or iron, close to the system will trigger the sensor and thus send the wireless signal to the receiver. This differs from a PIR based system which is typically activated by movement of any kind.
The benefit of a magnetometer system is that the sensor will not trigger based on movement by animals, leaves, people, etc. The negative is that this system will not detect movement caused by animals, leaves, people, etc.
Features
- Battery powered sensor
- Receiver powered by included AC-adaptor
- Receiver chimes when triggered
- Receiver flashes red LED for 15 minutes when triggered (LED can be turned off by pressing reset button)
- Under ideal conditions (line of site) the sensor may be placed up to 1,000 ft. away from receiver
- Magnetometer sensor triggered by large metallic objects
- May purchase additional Driveway Monitor sensors to cover multiple areas (up to four) per receiver
- May be set to low, medium, or high sensitivity level
- Additional transmitter (sensor) will produce a different chime from the receiver when triggered
- Receiver has a 12 volt transistor output jack for optional accessories. Output is adequate for small 12 volt relay coil
- Can temporarily silence the receiver...for example, avoid morning paper delivery from triggering receiver
- Wireless frequency is 315Mhz
- One year warranty from date of original purchase
|
|
Driveway Informer® |
|
Security2020® presents the Driveway Informer® driveway alarmDesigned and manufactured in the U.S.A., latest technology! This is the most reliable unit on the market. Four channel and up to 3000 foot range. |
A High Quality Driveway Alarm.- Range of 1500 ft. to 3000 ft.
- Up to 4 monitoring zones with unique audio alerts for each zone
- Extra speaker option to hear Informer alerts in a 2nd location (speaker addon sold seperately)
- Accessories connection (12v DC terminal) for items such as the Siren, Strobe Light, X-10 Interface and more
- Built in counter with digital display
- Two year battery life expected (At 500 rings per day)
- Battery included!
- Made in the U.S.A.
- This is the new "A" system, not compatible with older models. Please call us for availability on models to match your system.
| 
American Made |
|
|
